How Does It Work?

CONTROL YOUR SABER WITH A FREE APP

Did you know that you can now control your lightsaber through your phone? Through the app “Xeno Configurator”, you can easily connect you lightsaber to your phone via bluetooth! This way, you will be able to adjust the saber’s volume, sound font, blade color, and more! (available for Apple iOS and Android)

 

MANUAL INSTRUCTIONS:

 HOW TO TURN ON YOUR SABER

The lightsaber will arrive in deep sleep mode and will automatically go into deep sleep mode (the best mode to save battery life) after leaving the saber off for a few minutes. If you'd like to turn your lightsaber on when in deep sleep mode, press and hold the button for a few seconds. 

Turn your lightsaber off by pressing and holding the button for four blinks from the light surrounding the button (around four seconds).

To turn on your lightsaber when it’s not in deep sleep mode, simply tap the button!

 

EFFECTS

Blaster effects are activated by tapping the button once when the saber is on.

To activate the lock-up loop (an awesome effect for when your lightsaber is locked against another in a duel), press the button for 1 blink. You can deactivate the lock-up loop by tapping the button.

Clash effects are produced automatically with the movement of the lightsaber.

 

COLORS

Press and hold the button for 3 blinks when the saber is on. You have now activated color switch mode where the saber will cycle through a variety of colors. Select your color by tapping the button when the color you want is illuminated. The saber will remain this color each time you turn it on until you decide to change its color once again.

 

SOUND FONTS

Turn the saber off and then hold the button for 3 blinks. This will allow you to switch between the sounds the saber makes when ignited!

 

VOLUME

The volume can be changed by turning the saber off and holding the button for one blink.

 

LIGHT STYLES

By turning the saber off and holding the button for 2 blinks, you can cycle from different light styles.

 

CHANGING THE BLADE

All our lightsaber come with tools to unscrew the lightsaber. The screw holes can be found on top of the lightsaber hilt. Just simply remove the screws and remove or place your blade in the hilt. When putting in your blade make sure to tightly screw it otherwise the blade can fall out.